Effect of Modified Nanoclays on the Mechanical Properties of Thermoplastics Polymer Nanocomoposites

N. Ouslimani, B. Kouini, K. Boumerdassi

Abstract


Abstract: Nanocomposites based on polypropylene/polyamide66 (PP/PA66) nanoblends containing organophilicmontmorillonite (OMMT) and maleic anhydride grafted polypropylene (PP-g-MAH) were prepared by melt compounding method followed by injection molding. Two different types of nanoclayswere used in this work, i.e. DELLITE LVF (untreated): is a nano-clay deriving from a naturally occurring especially purified montmorillonite and DELLITE 67G (treated with a high content of quaternary ammonium salt (dimethyl dehydrogenated tallow ammonium). The rheological results revealed a drastic reduction in MFI with a levelling off at 5 wt.% for the nanoblends containing treated clay. The impact properties of PP/PA66 modified nanoblends were improved significantly in the presence of treated nanoclay. The morphology of the nanocomposites was studied using the XR diffraction (XRD). ­

XRD results revealed the formation of nanoblends as the nanoclay was intercalated and exfoliated.

Full Text:

PDF

References


Araujo, E. M.; Araujo, K. D.;Paz, R. A.;Gouveia, T. R.;Barbosa, R.;Ito, E. N. Polyamide 66/Brazilian Clay Nanocomposites. Journal of Nanomaterials. Vol 2009(2009).1-5.

Ravi Kumar, B.N.; Suresha, B.; Venkataramareddy,M.

Journal composite interfaces, 17(2010) 113-126.

Utraki, L. A. Journal of Nanoscience and Nanotechnology. 8(4)(2008) 1582-1596.

Yu, Z. Z.; Yan, C.; Yang, M.; Mai, Y. W. Mechanical and dynamic mechanical properties of nylon 66/montmorillonitenanocomposites fabricated by melt compounding. Polymer International. 53(2004) 1093-1098.

Heino, M.; Kirjava, J.; Heitaoja, P.; Seppala, J. Compatibilization of Polyethylene Terephthalate/Polypropylene Blends with Styrene-Ethylene/Butylene-Styrene (SEBS) Block Copolymers.Journal of Applied Polymer Sciences.65 (1997)241-249.

Vocke, C.; Anttila, U.; Heino, M.; Hietaoja, P.; Seälä J.Use of oxazoline functionalized polyolefins and elastomers as compatibilizers for thermoplastic blends. Journal of Applied Polymer Sciences. 70(1998) 1923-1930.

Kouini, B.; Serier, A. Studying the Effect of Nanoclays on the Mechanical Properties of Polypropylene/PolyamideNanocomposites.International Journal of Materials and Metallurgical Engineering. 10 (3), 331-334.

Mujibur, R.; Khan, S.A.; Mahfuz, H.; dwards,K. Polymer Science Series A. 57(2015) 863–873.

Ide, F; Hasegawa, A.Journal of Applied Polymer Sciences18(1974) 963.

Huang, X. Y.; Lewis, S.; Brittain, W. J.;Vaia, R. A. Synthesis of polycarbonate layered silicate nanocomposites via cyclic oligomers.Macromolecules. 33 (2000).

Chow, W. S.;Mohd Ishak; Z. A.;Karger-Kocsis, J.;Apostolov, A. A.;Ishiaku, U. S.Compatibilizing effect of maleated polypropylene on the mechanical properties and morphology of injection molded polyamide 6/polypropylene/organoclaynanocomposites. Elsevier Polymer. 44(2003) 7427-7440.

Xie, Wei; Gao, Zongming; Pan, Wei-Ping; Hunter, Doug; Singh,Anant;Vaia, Richard. Chemical Materials;13 (2001)2979.

Garcia-Lopez,D.; et al. European Polymer Journal. 39(2003) 945-950.

Vaia, R.A.; Jandt, K.D.; Kramer, E.J.; Giannelies, E.P. Kinetics of polymer meltintercalation. Macromolecules. 28(24)(1995) 8080-8085;

MA,J; Qi,Z-N; HU, Y. Journal of Applied Polymer Science.82(2001) 3611-3617.

Tang, Y.; Yuan, H. Polymer Advances Technology.14(2003) 733-737.

Soykan, C.; Akbay, M. Journal of Material Science and Technology Research. 6(2019) 22-33.


Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License. Copyright UMMB © 2020 University M'hamed Bougara - Boumerdes. Independance AV., Boumerdes, 35000 Algeria, Tel/Fax: +213 24 91 14 98/ +213 2491-29-51